FCC WARNINGS
Pursuant to FCC 15.21 of the FCC rules, changes or
modifications not expressly approved by Dwyer
Instruments, Inc. might cause harmful interference and
void the FCC authorization to operate this product.
RF WARNING
This product complies with FCC OED Bulletin 65 and
Industry Canada’s RSS-102 radiation exposure limits
set forth for an uncontrolled environment.
This Class B digital apparatus complies with Canadian
ICES-003.
The antenna used for this transmitter must maintain a
separation of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Conformément à la norme FCC 15.21 de la
réglementation FCC, les modifications non approuvées
expressément par Dwyer Instruments, Inc. peuvent
provoquer des interférences nuisibles et annuler l'autorisation FCC d'utilisation
de ce produit.
AVERTISSEMENT RF
Ce produit est conforme aux limites
d'expositions aux rayonnements définies pour un
environnement non contrôlé du Bulletin 65 FCC OET et RSS-102 Industry
Canada.
Cet appareil numérique de classe B est
conforme à la norme Canadian ICES-003.
<
French translation: Antenna separation
>
MAINTENANCE
Some simple routine maintenance after each use will ensure that the
instrument will function correctly for many years.
•
Remove any moisture droplets using a clean, absorbent cloth/paper
before disassembling and storing the unit.
•
Remove the battery if the unit is to be stored, unused for an extended
period of time.
•
Always store and transport the unit carefully. Store in dry conditions.
•
DO NOT immerse the instrument in water.
•
DO NOT use abrasive cleaning products on the hood. The instrument can
be wiped clean with a damp cloth.
•
DO NOT use abrasive cleaning products on the Pitot tube grid, which may
block or damage the grid. The grid may be CAREFULLY wiped clean with
a cloth. Ensure Pitot tube holes are not contaminated with moisture.
•
DO NOT use abrasive cleaning products that may damage the grid, or
may leave a residue in or around the holes.
•
Check periodically for damage or any visible cracks.
•
Take care to not damage or obscure the calibrated holes in the tubes.
This can seriously affect the measurements obtained.
Capture hood fabric can be wiped clean with a damp cloth, if necessary, and
moisture droplets dried with an absorbent cloth/paper. Periodically, wash in
cool water using a mild detergent. Drip dry, ensuring it cannot become caught
in any sharp objects.
The fabric used is impermeable, tough, and very resistant under normal use.
In the event that the fabric becomes worn or torn, replace the fabric hood
immediately. A damaged hood will seriously affect the measurements taken.
Anti-static solution can be applied to the instrument by using a clean, lint-free
cloth and carefully rubbing it over the instrument case and window.
Note:
This is normally only necessary when working in low humidity
conditions.
REPAIR
The Series SAH SMART Air Hood™ is not field serviceable and is not possible
to repair the unit. Field repair should not be attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sale” in our catalog and on our website.
Contact customer service to receive a Return Goods Authorization number
before shipping the product back for repair. Be sure to include a brief
description of the problem plus any additional application notes.
FR# 444357-00
