DWYER INSTRUMENTS, INC.
Phone: 219/879-8000
www.dwyer-inst.com
P.O. Box 373 • Michigan City, IN 46361 U.S.A.
Fax: 219/872-9057
e-mail: [email protected]
The Dwyer Series DCG Digital Calibration Gage
features a
remarkable 0.05% full-scale accuracy that includes the effects of
linearity, hysteresis, repeatability, and temperature across the
entire compensated temperature range. This gage was specifical-
ly designed to be a portable test gage where its unmatched accu-
racy is required. This is a highly durable gage that is housed in a
rugged and compact 3 inch stainless steel case.
This highly accurate test gage offers menu configurable and pass-
word protected features that include engineering unit conversion,
seven selectable languages, field calibration capabilities, as well as
an adjustable bar graph and update/dampening rates.
INSTALLATION
When installing the gage use a 7/16˝ wrench on the wrench flat of
the gage to tighten the gage to the process. DO NOT tighten the
connection by applying torque to the gage body which could
cause permanent damage and render the gage inoperable. It is
good practice to apply Teflon
®
tape or pipe sealant to the gage
threads.
Teflon
®
is a registered trademark of E.I. du Pont de Nemours and Company
Series DCG Digital Calibration Gage
Specifications - Installation and Operating Instructions
Bulletin A-34-DCG
SPECIFICATIONS
Service:
Compatible, non-combustible liquids & gases.
Wetted Materials:
316 SS.
Housing Materials:
300 Series SS.
Accuracy:
0.05% F.S. including linearity, hysteresis, repeatability,
and thermal effects across entire compensated temperature
range.
Pressure Limit:
2 x F.S. range.
Temperature Limits:
0 to 150°F (-18 to 66°C).
Compensated Temperature Range:
0 to 150°F (-18 to 66°C).
Size:
3.00˝ OD x 1.70˝ Deep.
Process Connection:
1/4˝ male NPT.
Enclosure Rating:
NEMA 4 (IP65).
Display:
4-1/2 digit (0.66˝ high); 19999 counts.
Power Requirements:
Three AAA batteries.
Battery Life:
>1000 hours.
Auto Shut-off:
Gage: On/off, 2 min., 5 min., 15 min., 30 min.;
Backlight: On/off, 10 sec., 30 sec., 1 min., 5 min.
Agency Approvals:
CE.
4-11/32
[110]
Ø3-11/32
[Ø85]
1-11/16
[43]
5/8
[15.5]
DCG iom 3/17/05 11:23 AM Page 1