
9.
CAUTION
NOTE:
The meter is accurate at low and mid-
range
air speeds. Consistent use at very
high speeds., ie, From the window of a
fast-moving car will damage the impeller’s
bearing and reduce accuracy.
NOTE:
When you program the meter and then
restart the meter, it will default to the last
mode (except the sleep mode) and unit
used.
NOTE:
You can remove the transparent protection
film of the LCD if you feel the display is
blurred
.
.
TROUBLE SHOOTING
1. Power on but no display
a) Make sure the time of pressing
key is > 0.1 second.
B )Check the batteries are in place with
good contact & correct polarity.
c) Replace battery or move away the
battery for one minute and re-install.
2. Display disappear
a) Replace a new battery.
b) Disable the auto power off function
before power on for long time using.
3. Err
The temp. related components or circuit
is damaged. Sent back for repair.
5. Windspeed reading is always zero
The windspeed components or circuit
is damaged. Sent back for repair
4. HI
The windspeed is higher than 44.7M/H
www.
.com
1.800.561.8187