Dwyer Instruments 477A-1 Скачать руководство пользователя страница 1

Series 477A Digital Manometers

are ver-

satile, hand-held, battery operated manome-
ters available in several basic ranges from 0-
20 in. w.c. up to 100 psi. All models measure
either positive, negative or differential pres-
sures with ±0.10% of full scale accuracy. You
can select from up to seven common English
and metric pressure units so conversions are
not necessary. A memory function allows
storage of up to 40 readings for later recall
and a backlight provides auxiliary lighting for
hard-to-see locations. Also standard are a
hold feature plus both visual and audible over-
pressure alarms.

477A-1

0-20.00 in. w.c.   0-4.982 kPa

477A-2

0-40.00 in. w.c.   0-9.96 kPa

477A-3

0-200.0 in. w.c.   0-49.82 kPa

477A-4

0-10.00 psi         0-68.95 kPa

477A-5

0-30.00 psi         0-206.9 kPa

477A-6

0-50.00 psi         0-344.8 kPa

477A-7

0-100.0 psi         0-689.5 kPa

Series 477A Handheld Digital Manometer

Specifications - Installation and Operation Instructions

Bulletin D-26

DWYER INSTRUMENTS, INC. 

Phone: 219/879-8000     www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A.    

Fax: 219/872-9057          e-mail: [email protected]

SPECIFICATIONS

Service: 

Air and compatible gases.

Wetted Parts: 

Consult factory.

Accuracy:  

±0.10% of full scale from 60 to 78°F

(15.6 to 25.6°C); ±1% of full scale from 32 to 60
and 78 to 104°F (0 to 15 .6 and 25.6 to 40°C). 

Pressure Hysteresis: 

±0.1% of full scale.

Pressure Limits: 

See chart.

Temperature Limits: 

32 to 104°F (0 to 40°C).

Storage Temperature Limits: 

-4 to 176°F (-20

to 80°C).

Display:

4-digit LCD (.425˝ H x .234˝ W digits).

Resolution:

See chart.

Power Requirements:  

9 volt alkaline battery.

Battery included but not connected.

Weight:  

10.2 oz. (289 g).

Connections: 

Two barbed connections for use

with 1/8˝ (3.18 mm) or 3/16˝ (4.76 mm) I.D. tubing
for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5
only.  Two compression fittings for use with 1/8˝
(3.18 mm)  I.D. x 1/4˝ (6.35 mm) O.D. tubing for
477A-6 and 477A-7 only. 

Available Pressure Units:

477A-1 & 477A-2: psi, in. w.c., mm w.c., in.
Hg, mm Hg, Pa, kPa, bar, mbar

477A-3 & 477A-4: psi, in. w.c., mm w.c., in.
Hg, mm Hg, kPa, bar, mbar

477A-5, 477A-6 & 477A-7: psi, in. w.c., in.
Hg, mm Hg, kPa, bar, mbar

Model

Number

English

Range

Metric
Range

Maximum Pressure

477A-1     

3 psi (0.21 bar)

477A-2     

3 psi (0.21 bar)

477A-3     

15 psi (1.03 bar)

477A-4     

30 psi (2.07 bar)

477A-5     

60 psi (4.13 bar)

477A-6     

100 psi (6.89 bar)

477A-7     

200 psi (13.78 bar)

D-26:D-26(478)  7/10/09  10:04 AM  Page 1

Содержание 477A-1

Страница 1: ...ax 219 872 9057 e mail info dwyer inst com SPECIFICATIONS Service Air and compatible gases Wetted Parts Consult factory Accuracy 0 10 of full scale from 60 to 78 F 15 6 to 25 6 C 1 of full scale from 32 to 60 and 78 to 104 F 0 to 15 6 and 25 6 to 40 C Pressure Hysteresis 0 1 of full scale Pressure Limits See chart Temperature Limits 32 to 104 F 0 to 40 C Storage Temperature Limits 4 to 176 F 20 to...

Страница 2: ...es a display backlight to allow use in the dark or in poor lighting con ditions Manometer must be switched off before this feature can be activated Next press and hold the ON OFF key down After about 1 second the backlight will come on and remain light ed for approximately 2 minutes after which it will turn itself off to conserve battery life Zeroing Pressure Reading Potential inaccuracy due to te...

Страница 3: ...reading press and hold the HOLD MEMORY until ST01 is displayed then release the key Next press ZERO STORE key to save current reading to ST01 memory location A beep will sound indicating that the reading has been saved As each reading is saved the mem ory location display will advance to the next number To resume pressure measurement press the HOLD MEMORY key again Note that in the memory mode the...

Страница 4: ... unit Exceeding the range will not damage it or affect calibration as long as the maximum rated pressure is not exceeded Do not exceed the maximum rated pressure of the manometer Doing so will cause permanent damage to the sensor may rupture the housing and or cause injury The maximum pressure is shown on the rear label and on page 1 of these instructions Low Battery Indicator A weak battery can c...

Отзывы: