89 |
P a g e
8-7-5. System
Select
System
to set system and time settings.
8-7-5-1. System
Setting the System
DVR ID
: Sets individual designation to DVRs.
Date Format:
Select the date display format (YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-
YYYY, DD-MM-YYYY)
NTP:
Sets whether to synchronize the time using NTP server or not.
Primary SNTP Server
: Input the NTP primary server address.
Secondary SNTP Server
: Input the NTP secondary server address.
Time Zone
: Select the time zone.
Connection Mode
: Select the connection mode to NTP time server.
Time
: Synchronize the time at the time that is set.
Interval
: Synchronize the time by hours that is set
Connection Period
: Set the connection period.
Send EMAIL:
Enable/disable send e-mail function.
This setting is used to automatically send a notification e-mail to a specified address when an alarm occurs.
(Memo: The DVR will be forcibly restarted if a value on this screen is changed.)
Send E-Mail
: Sets whether to enable/disable e-mail sending function.
Transmission Mode
: Enables sending image of the channel that triggered the alarm when an alarm event is triggered.
IP Notification
: To send a notification e-mail when the DVR IP address is changed, check the checkbox.