www.SitePro.us.com
4
5
When the product is tilted clockwise, the blocks will
appear on the other side of the center line in the same
manner as described for the counter clockwise tilting of
the product.
Press
Duration
Function
> 2 sec.
Turns Power ON and OFF
< 2 sec.
Holds the currently
displayed angle even if the
levels position changes.
Releases the angle dis-
play to show the current
angle.
< 2 sec.
Turns ON and OFF the
speaker. The speaker will
sound when the display
shows 0, 45 or 90°.
≥
2 sec.
Turns ON and OFF LCD
backlight.
(Backlight with turn OFF
automatically after 3
minutes of inactivity)
< 2 sec.
Press Once:
IN/FT = Slope display is
0 to 12” (ref. 0 to 45°)
Press Twice:
% = Grade display is 0 to
100% (ref. 0 to 45°)
Once:
Display changes
from “IN/FT” to “%”
(Grade).
Twice:
Display changes
from “%” to “°”.
< 2 sec.
The angle displayed will
be reset to a Reference
Zero Point. The display
shows “- - - - -”, then
“ABS” flashes while in
this mode. Press again to
return display to original
zero point.
< 2 sec.
Press Once:
Set temperature to
display in °F. (Default)
Press Twice:
Set temperature to
display in °C.
Set the temperature
display to ° Fahrenheit or
° Celcius
ABS
ABS
ABS
ABS
ABS
ABS
Tilt indicator
The upper left corner of the display shall show a general
indicator of direction/magnitude of tilt of the product.
At level or 0.0°, only the
will be displayed.
From 0.1° to 14.9°of counter clockwise tilt, the display is
show
Every 15.0°, another block will be added to the tilt indica-
tor until all blocks are shown.
ABS
ABS
ABS
ABS