7
Installation -
Disassembling the Camera
Before installing your camera, you have to read the following cautions.
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may
cause a short or fire.
3. For the installation process, remove the camera cover from the camera module by loosening the three (3)
screws on the dome. Use the wrench provided with the camera.
The camera includes a sensor at the camera module.
For the sensor to function properly, the camera’s
cover includes a special sensor hole.
When assembling the camera together, please
make sure the sensor hole in the camera’s cover is
aligned with the sensor in the camera module.
When placing the cover back on the camera, also
make sure to align the cover and bottom case to
match the case outline.
Reset to the Factory Default
Press the reset button for 5 seconds to return the
setup to the factory default.
Warning:
If you press the ‘Reset’ button, you will lose all
setting data. If needed, please, make a note for
further installation.
Reset Button
