Quick Start Guide
Rev: 01/22
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1
Assemble the ceiling mount bracket by connecting the bracket base, arm and connector using the neck connection screws.
2
Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
3
Secure the mounting bracket to the mounting surface using the screws and anchors that were included with the mount.
4
Mount the junction box base to the ceiling bracket using the bracket-to-junction box mounting screws and waterproof rings.
5
To mount the camera to the junction box, remove the dome from the camera base using the wrench included with the
camera.
NOTE:
Do not touch the lens when handling the camera.
6
Pass wires through and make all necessary connections. Arrange the cables in the junction box base. Use the waterproof cap
and gasket with the network cable to reduce the risk of water leaks. See the camera’s QSG for more information.
7
Secure the camera to the mounting bracket using the included camera mounting screws.
8
Adjust the camera’s lens position and angle and place the cover dome on the camera base to complete the installation.