Disassemble the camera
Installation -
Reset to the Factory Default
Press the reset button for 5 seconds to return the setup
to the factory default.
Warning:
If you press the ‘Reset’ button, you will lose all setting
data. If needed
,
please
,
make a note for further installation.
Reset Button
Protection
Film
2
1
Screw hole cap
3
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear five times of the weight of your camera.
2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
3. When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
Detach the dome cover by torx wrench provided from
bottom case before installation the camera.
1
Before install the camera, remove the Protection Film.
2
Remove the screw hole cap according to the installation.
When using Mount plate, mount bolt / nut do not need
to be removed when using.
3
7