Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Quick Start Guide
STEP 3 – MANAGING THE SD CARD
STEP 5 – NETWORK ACCESS (WEB)
STEP 7 – LIVE VIEW
User can insert and remove Micro-SD card as shown in the following picture.
Network Setup
1.
Go to:
http://www.digital-watchdog.com
2.
Search for ‘IP Finder’ on the quick search bar at the top of the page.
1
2
3
4
3.
The latest IP Finder software will appear in the search results. Click on the
link to download the file to your computer.
5 6 7 8 9 10 11
12
13
4.
The software will scan your network for all supported cameras and display
the results in the table. Allow up to 5 seconds for the IP Finder to find the
Reset Button
camera on the network.
1.
Select Stream 1 (H.264), Stream 2 (MJPEG), Stream 3 (H.264)
5.
Select a camera from the list by double-clicking on the camera’s image
2.
Select resolution up to 1920x1080
or clicking on the ‘Click’ button under the IP Conf. column. The camera’s
network information will appear. If necessary, you can adjust the camera’s
network type.
3.
4.
Select network protocol between HTTP, TCP, and UDP
Call preset up to 256
1.
Input IP address of network PTZ Camera
5.
Stop and start for live stream
Micro-SD Card Slot
Select DHCP if the internet service is dynamic IP. This will allow the camera to
receive its IP address from the DHCP server.
2.
Click between Live View, Playback, and Setup for operation
3.
Login (default admin / admin) for setup is necessary
6.
7.
Stream pause
Snapshot
1.
Open the Micro-SD card cover.
2.
Insert or remove Micro-SD card.
3.
Tightly close the Micro-SD card cover to ensure it is waterproof.
Select STATIC to manually enter the camera’s IP address, subnet mask,
Gateway and DNS information.
Contact your network administrator for more information.
STEP 6 – LIVE VIEW (WEB)
8.
9.
10.
11.
Zoom
Full screen
Manual trigger
Pop-up PTZ control panel
Resetting the camera:
To reset the camera, use the tip of a paper clip
or a pencil and press the reset button. Pressing the button for five (5)
6.
The camera’s default network
information is:
12.
13.
Speaker volume
Microphone control
seconds will initiate a camera-wide reset of all the settings, including
network settings.
Default TCP/IP information
1
2
3
4
5
10
11
• IP: DHCP
STEP 4 – DW IP FINDER
™
Use the DW IP Finder
™
software to scan the network and detect all MEGApix
®
1.
Change stream resolution
cameras, set the camera’s network settings or access the camera’s web client.
7.
To view the camera’s web viewer, click on ‘View Camera Website’. Enter the
2.
Live view mode
camera’s username and password (default: admin/ admin) to login to the
3.
Playback mode
Camera’s
View Camera’s
camera.
4.
Setup menu
Search for Cameras
Filter Search Results
Network Settings
Thumbnail View
‘Port Forwarding’ has to be set in your network’s router for external access
to the camera.
5.
Click to open Help menu
Default ID / PW : admin / admin
Camera Uptime
Camera’s Firmware
8.
To save the changes made to the camera’s settings, input the ID and PW of
Open Camera’s IP
Configuration Screen
the camera for authentication and click ‘Save’.
Camera Name,
Model, IP Address,
and MAC Address
9.
If the camera needs to be rebooted after the settings were changed, press
the ‘Reboot’ button. The camera will cycle power and will appear back in the
NOTE:
Please see the full product manual for web viewer setup,
search results once the reboot is complete.
functions and camera settings options.
Firmware Upgrade
Copyright © Digital Watchdog. All rights reserved.
Rev Date: 03/17
Specifications and pricing are subject to change without notice.