̰GG
Do not open or modify.
̰GG
Do not open the case except during maintenance and installation,
for it may be dangerous and can cause damages.
̰
G
Do not put objects into the unit.
̰GGGG
Keep metal objects
ble substances from entering the camera. It can cause
short-
circuits, or other damages.
̰GGG
Be careful when handling the unit.
̰
To prevent damages, do not drop the camera or subject it to shock or vibration.
̰
Do not install near electric or magnetic elds.
̰
Protect from humidity and dust.
̰
Protect from high temperature.
̰
Be careful when installing near the ceiling of a kitchen or a boiler room,
as the temperature may
rise to high levels.
̰
Cleaning
̰
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
̰
Mounting Surface
̰
The material of the mounting surface must be strong enough to support the camera.
GGGGGGGGGGGGGGGGGGGGGGGGGGGG
PRECAUTIONS
Before sending your camera for repair, check the following or contact our technical specialist.
No VIDEO
Check the coaxial cable and make sure it is connected securely.
Check the lens’ iris adjustment at the menu setup of the camera.
Check the power supply and make sure the camera has the proper voltage and current.
Out-of-Focus VIDEO
Check the clear dome cover and the lens for dirt or ngerprints. Use a soft cloth and gently clean.
Check the lens manual focal and zoom adjustment. Field test monitor is recommended.
TROUBSHOOTING
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to Provide reasonable protection
against harmful interference .when the equipment is operated in a residential environment.
This equipment generates, uses, and radiates radio frequency energy; and if it is not installed
and used in accordance with the instruction manual, it may cause harmful interference to radio
communications.
WARNING
: Changes o
not expressly approved by the manufacture.
FCC COMPLIANCE
3
2
̰
1/3” Sony Super HAD II CCD
̰
High Resolution 600 TV Lines
̰
6~50mm Varifocal Auto Iris Lens
̰
13~30ft Capture Range
̰
Plate Recognition Technology Captures License Plates up to
50mph
̰
Reliable Performance under Any Lighting Conditions
̰
Star-Light (Super Low Light Technology)
̰
3D-DNR (3D Digital Noise Reduction)
̰
HME (Highlight Masking Exposure)
̰
Easy Icon Driven OSD Menu with Built-In Joystick
̰
Auto Sensing 12 VDC / 24 VAC with Line Lock
̰
Secondary Video BNC Output Cable for Field Test Monitor
̰
No Fog or Condensation under Any Weather Condition
F
E
ATU
RES*