6
6.
Enter IP Address then press Tab on the keyboard to move to Netmask.
7.
Ignore any populated values and enter the valid Netmask value, then press Tab on the keyboard to move to the Gateway.
8.
Enter the Gateway address if required then press Enter on the keyboard.
* Gateway is not required on the camera network.
9.
Click ‘Save’ to save the settings.
10.
In the Network Settings main page, make sure the Wired Status is marked as “Connected”
or “Managed” with the IP Address displayed.
NOTE
It must be the same network as the cameras and must not be the same network as the local network.
Contact your network administrator for more information.
Local Network
11.
Select Wired with picture of network port and repeat 2 to 8 of STEP 3 Configure Network.
