SETTING UP THE SERVER
STEP 1:
Connect external devices, power and network.
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B12 on the diagram).
Configure the camera’s network first, then configure the server’s local network.
2. Connect the server to an appropriate power source. It is recommended to use a 750VA or higher UPS system.
3. Power up the server if the server does not turn on automatically by pressing the power button on the front of the
server. (F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically.
Quick Start Guide
3
SETTING UP THE CUBE
STEP 1:
Connect Peripherals, power and network
1. Connect a monitor, USB keyboard, USB mouse and network cable to the camera network(B12 on the diagram)
* Cable for the Local Network should be connected after the IP settings are configured.
2. Connect the server to an appropriate power source. Recommended to use 750VA or higher UPS system.
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the Cube. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
3
SETTING UP THE CUBE
STEP 1:
Connect Peripherals, power and network
1. Connect a monitor, USB keyboard, USB mouse and network cable to the camera network(B12 on the diagram)
* Cable for the Local Network should be connected after the IP settings are configured.
2. Connect the server to an appropriate power source. Recommended to use 750VA or higher UPS system.
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the Cube. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
3
