Input
600 ohms
Input Load
Impedance
40k ohms
Minimum Input
Level
-20 dBm nominal
Maximum Input
Level @ 20 cps
+25 dB
Gain
-4 dB
Frequency
Response
± 0.5 dB 20 cps to 20 kc
-3 dB @ 0.5 cps & 82 kc
THD + Noise
<0.20% 20 cps to 20 kc
Intermodulation
Distortion
SMPTE: <0.80%
Signal to
Noise Ratio
78 dB minimum
Output
low-Z, transformer balanced
Maximum
Output Level
+22 dBm unterminated
Power
Requirements
100, 120, or 220 VAC
50/60Hz, 25 W
Dimensions
19” (48.26cm) W
5.25” (13.34cm) H
9” (22.86cm) D (VT-2 13” 22.9cm)
Weight
14 lbs (6.35 kg)
1.
SPECIFICATIONS
Note: Throughout this manual, frequency is specified in cps (cycles per second) or
kc (kilocycles per second). These units of measurement correspond to Hz and kHz
respectively. Specifications subject to change without notice
(All measurements made with +4dBm in and out, Eq switched in but all
controls set to flat.)
