
5
6
Advanced operation
•
Move the support point along the rods to match your camera weight, the desired
overall springiness, and spring resistance.
•
To adjust the pods length, lift the camera to just above horizontal position and lock
the top locking knob.
•
The top spring is softer the bottom spring. Choose the one that is best for your
camera weight and type of shooting, lock the other.
•
In normal operation only one section of the pod should be free.
•
For extreme up and down tilting Slide the support assembly all the way back and
release both pole locks.
•
For most stable longer period shoots, or tele shoots, Tighten nut (4) and both pod
locks.
Never walk with nut (4) locked !!!
•
The rods position can be vertically and horizontally adjusted
•
For Matte Box use, adjust screws 5 and 6. to center the matte box with the center
of your lens.
For more information visit:
www.dvtec.tv
or mail us to: [email protected]
3
1