The extension arm is good only for small hand held camcorders.
e.g. DVX-100, PD-150 Etc
.
•
Attach the arm to the center column using the 3/8 screw. And tighten locking ring (9)
•
Make sure the white mark (10) is placed opposite the locking knob (Fig.6).
•
Tighten knob (13).
•
Loosen knob the main column lock (14) and swing the arm to the desired position.
•
Keep the arm length,(distance between the load (Camera) and the center column) as short as
possible.
•
Attach the ball head or any other 3/8 camera or QR assembly to the carriage (11) or to one of the
arm’s end.(12)
•
Make sure everything is locked before a shoot.
12
11
12
9
10
Fig.1
14
Fig.2
Fig.3
Fig.4
leveling knobs
13
Fig.6
Fig.5