DVS SpycerBox, Руководство по оборудованию

Страница: 24 / 62

2-6
SpycerBox Hardware Guide
2.1.5 Faceplate
The faceplate covers the hard disks of the hard disk array.
Figure 2-6: Overview of the faceplate
The faceplate is built with an integrated backlit DVS logo which indi-
cates the state of the system, i.e. its power-on status: If the DVS logo is
illuminated, the power is turned on; if not, the power is turned off.
The top side of the faceplate is hinge-fastened, while its bottom side is
fixed with magnets. If you need access to one of the hard disks, for ex-
ample, to replace it, you just have to lift the faceplate:
Figure 2-7: Lifting of faceplate
9 power The power switch turns the system on or off.
The respective state of the system will be indi-
cated by the DVS logo in the middle of the face-
plate (see section “Faceplate” on page 2-6).
No. Item Explanation
SpycerBox
faceplate backlit DVS logo
SpycerBox