DVS SpycerBox Flex, Руководство по оборудованию

Страница: 10 / 84

Introduction
 Overview
1-2
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
1.1 Overview
This guide informs you about the installation of the SpycerBox hard-
ware, its operation as well as all connection possibilities. Furthermore,
it describes maintenance tasks that you may carry out on your own.
The chapters contain the following information:
Chapter 1 Begins with a short introduction to the Spycer-
Box, followed by a note regarding the audience
this manual is written for and an explanation of
the conventions used in this manual. Further-
more, it provides safety instructions that you
must adhere to and some important notes that
you should observe.
Chapter 2 This chapter gives a front and rear overview of
the system detailing all items, connectors and
interfaces. Additionally, it contains some further
information, for example, about the battery
backup unit.
Chapter 3 Describes the hardware installation of the R&S
DVS system.
Chapter 4 Explains how to operate the R&S DVS system,
i.e. how to start and shut down the device. Ad-
ditionally, the DVS Configuration Tool and
SAN Remo are described briefly.
Chapter 5 Details maintenance work, for example, in case
of a hard disk, fan or power supply unit failure.
Appendix Provides technical details and general informa-
tion about the hardware of the R&S DVS sys-
tem. Furthermore, it gives hints how to resolve
irregularities during operation.
Index This chapter facilitates the search for specific
terms.