Displayed on the home screen.
DVS® EC Automatic Controller User Guide
Please note: ‘OF’ on the controller means ‘OFF’
Phone 0800 387 387 | www.dvs.co.nz
Holding down the button for 5 seconds will enter
the shortcut for setting the High Temperature Cut out.
Both LEDs (house and supply) will flash.
The system will shut off when the supply air is above this
temperature.
The display will show the current High Temp cut out
temperature, or “0F” if the feature is off. Pressing
or will change the cut out temperature, and
ensure the High Temperature cut out feature is activated.
The feature can be turned off by pressing or
until “0F” is displayed.
After 15 seconds without pressing a button, the menu
will exit and return to Fan Operation ON / OFF display.
Turning high temperature
cut out on and off
(Factory set to 27
o
)
Pressing either or while displaying House
temperature or Supply temperature will change to
displaying the FAN ON or FAN OFF indication
Main Display
Temperature Display
System On / Off
Main Display
Will show fan operation
Indication.
Moving symbol = Fan On
Static symbol = Fan Off
Press for 2 seconds to
turn the system On / Off.
By pressing the
Temperature Display
button you can check
the Temperature at the
control panel and the
Supply Air Temperature
in the system fan. The
associated LED will
illuminate indicating
which temperature
you are viewing. You
can toggle between
each by pressing the
Temperature Display
button more than once.
To increase
or decrease
the calibrated
condensation
control setting
(air supply rate)
press Increase or
Decrease.
Air Supply
See Temperature
Display.
LED Indicators
