-6-
5.0 OPERATING THE UNIT
5.1 Controlling the Unit
The Scaler is controlled via three buttons with status indicated by an On-Screen
Display.
1
1
2
2
4
3
3
4
DVI-3410a Output Panel
DVI-3420a Output Panel
1
Menu Button:
This Button displays the Menu Options via the On-
Screen Display on the display device connected to the output.
2
+ and – Buttons:
These Buttons allow navigation within the Menu and
adjustments of the parameters available.
3
XGA Reset:
Simultaneously depressing the – and + buttons returns
all settings to factory default values and sets the output resolution to
XGA@60 Hz.
4
480p Reset:
Simultaneously depressing the MENU and – buttons
returns all settings to factory default values and sets the output
resolution to 480p.
Pressing the Menu Button results brings up the Initial or
Main Menu
. Move
the cursor to the desired setup option by using the + and – buttons. Press the
Menu Button again to call up that option.
Picture Adjust
Display Setup
Advanced Setup
System Information
Exit
When the desired option is reached and selected, a new Menu will appear
and you once again use the + & – buttons to select the parameter you wish to
change or adjust.
