10)
Go to the
New Output
tab to the right of
Input Setup
. Select
Enabled
. Enter
the
Stream Name
of the input you just defined.
11)
At
Input Program(s)
, input the program number for the program desired. (For
single program transport streams, enter the program number.)
12)
Video Transcoding Format and Audio Transcoding Format:
Transcoding is
not enabled on the OnRamp.
13)
Edit all the remaining parameters of your output stream and select Update.
14)
You can repeat steps 9 and 10 for all the output streams associated to a particular
input.