DVDO iScan Pro, Руководство пользователя

Страница: 22 / 26

Silicon Image, Inc. iScan Pro User Manual
22
Safety Information:
Safeguards
♦
To reduce the risk of electric shock, do not expose this appliance to rain or moisture; do not
operate the iScan Pro with the cover removed.
♦
If the wall plug does not fit into your local power socket, then ask your electrician to replace your
obsolete outlet. Do not modify the wall plug. To do so will void the safety feature.
Precautions:
Warning – FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
- Only operate your iScan Pro using the included external power supply. Use of other
supplies could impair performance or damage your iScan Pro or could cause fires.
♦
As a safety feature, the included external power supply is equipped a 3-wire grounded plug (a third
pin for grounding). The 3-wire grounded plug will fit only into a grounding-type outlet.
♦
Protect and route power cords so they will not be stepped on or pinched by anything placed on or
against them. Be especially careful at plug-ins, or cord exit points from the iScan Pro.
- Do not cover or block ventilation holes in the iScan Pro cabinet. Doing so may damage the
unit or cause improper operation.
- Avoid excessive humidity, sudden temperature changes or temperature extremes.
- Keep your iScan Pro away from wet locations such as bathtubs, sinks laundries, wet
basements and swimming pools.
- Use only accessories recommended by the manufacturer to avoid fire, shock or other
hazards.
- Unplug your iScan Pro before cleaning. Use a damp cloth for cleaning. Do not use
cleaning fluids or aerosols, which could enter the unit and cause damage, fire or electrical
shock. These substances may also mar the finish of your iScan Pro.
♦
Never open or remove covers or make any adjustments not described in this manual. Attempting to
do so could expose you to dangerous electrical shock or other hazards. It may also cause damage
to your iScan Pro.
♦
Do not attempt to service this unit. Instead, disconnect it and contact your authorized Silicon Image
dealer or distributor or Silicon Image directly.
“WARNING – FCC Regulations state that any unauthorized changes
or modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this
equipment.”