DVC DVC-4000D Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

DVC DVC-4000D Скачать руководство пользователя страница 4

4

1.

Introduction

The DVC-4000D cameras are based on the Kodak KAI-04022 interline CCD, which provides
2048x2048 pixel resolution and 7.4

µ

m square pixels with high quantum efficiency and low noise. The

DVC-4000D is offered in both standard and cooled configurations, with a choice of Gigabit Ethernet or
Camera Link interface.

Additionally, the DVC-4000D is bundled with the full complement of DVC software. For developers,
DVC offers an intuitive and highly-functional software developer’s kit, which includes a comprehensive
API to streamline the integration of any DVC camera into your system. After software installation, the
SDK can be found in the /dvcco/docs directory.

For end-users, the DVCView imaging application provides full control of up to 8

cameras

simultaneously through an intuitive user interface, and it allows the user to acquire, pan, zoom, analyze,
and save imagery and metadata. DVCView also provides direct-to-disk video streaming, time-lapse
capture, image averaging, image background subtraction, and flat-fielding.

This manual is a functional overview of the camera, and it is intended to be a companion to the
DVCView User Manual and/or the SDK.

«
...
2
3
4
5
6
...
»

Содержание DVC-4000D

























Отзывы:

Нет отзывов