DVB RRBR-02 Скачать руководство пользователя страница 4

Страница: 4 / 8

Moving to the vehicle, remove the trim piec-

es located at the top of the windshield by

gently pulling from the top until it releases.

Remove the factory nuts using a 10mm

socket and remove the plastic insert.

Assemble the front mounting brackets and

secure using provided M6x20 hardware with

a 4mm allen head and 10mm wrench.

This is a heavier duty hardware used for this

specific application based on the load that

is placed on this mount. You must be sure

to use the correct hardware. These brackets

are driver and passenger specific.

STEP 6

STEP 5

INSTALLATION

MANUAL

NEED HELP?

855-680-9595

DRIVERSIDE BRACKET

Содержание RRBR-02

Страница 3: ...ater The open section of the feet will face towards the inside of the rack NOTE The feet are designed and labeled for specific positions For example DF refers to Driver Front Peel paper from the foam and install to the corresponding brackets When applying foam to clamps the foam will bend and wrap inside the mount STEP 4 STEP 3 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Страница 5: ...e the rack to the front brackets using the provided M8 hardware and a 13mm socket Install the front mounting brackets and secure using the factory nuts and a 10mm socket Ensure the corners are facing towards each other to secure the rack STEP 8 STEP 7 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Страница 7: ...sing the 3mm allen bit and provid ed M5x16 hardware Align them and secure Do not over tighten these Finish securing the feet to the rack and the rack to the front mounts using a 13mm socket wrench STEP 12 STEP 11 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Страница 8: ...Double check fitment and all hardware is secure Congratulations you are finished with the install of the Ford Bronco Hard Top Roof Rack STEP 13 INSTALLATION MANUAL NEED HELP 855 680 9595 ...