INSTALLATION
MANUAL
NEED HELP?
855-680-9595
STEP 1 |
To install pem nuts, place
the provided M5 hardware through the top
of the bridge and thread the pem nut by
hand.
STEP 2 |
Use a 3mm allen head to
tighten the bolt while holding the pem
nut until it “catches” in the bridge and is
secure.
Take caution not to over tighten or the
bolt head may strip.
Begin by unpacking all items and
inspecting for missing pieces or damage.
If you have any concens, please contact the
company the product was purhcased from.
-(8) M5x16 Allen Head
-(8) M5x12 Allen Head
-(2) M5 Pem Nuts
HARDWARE
INCLUDED