INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
4
6
Align light bar as desired and secure.
Use a T40 to remove the six factory bolts where the bull bar will be mounted.
5
Secure wiring to the tabs using provided zip ties.
Страница 1: ...ury or harm to you or your vehicle as a result of an improper install Proper installation of this kit required knowledge of the factory recommended procedures for removal and installation of original equipment components We recommend that the factory shop manual and any special tools needed to service your vehicle be on hand during the installation Installation of this kit without proper knowledge...
Страница 2: ...sing the hardware provided with the lightbar NOTE This bull bar is designed to work with our 13 elite series light If you are using this light install now with 5 allen head and provided hardware Part number is BE13EW45W Scroll down to the last page for the dimensions if you are not planning on using our 13 elite series light STEP 2 Begin by applying the EVA foam to the bull bar where it will conta...
Страница 3: ...MANUAL 855 680 9595 NEED HELP STEP 4 STEP 6 Align light bar as desired and secure Use a T40 to remove the six factory bolts where the bull bar will be mounted STEP 5 Secure wiring to the tabs using provided zip ties ...
Страница 4: ...9595 NEED HELP STEP 7 STEP 8 Install the bull bar using a T40 and factory hardware then secure NOTE It is usually easiest to loosely install the top bolt first Wire lights as desired Double check fitment and all hardware is secure ...