2
1.
Begin by removing all parts and hardware and inspecting them for any abnormalities or
shipping damage. If you have any questions, please contact the company you purchased the
SPJL-10 from.
2.
Begin by using a 10mm socket to remove the (4) factory bottom differential cover bolts.
NOTE:
You will not have any issues with leaking oil if only these (4) are removed. Do not pull
or pry on differential cover.
3.
Once bolts are removed, hold your new axle skid plate up to the axle aligning these (4) holes.
Hand screw in the (4) factory bolts. Do not tighten at this point. The weight of the skid plate
should be able to be held on these loose bolts for now.