INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
5
STEP
7
Hold the mount up to the vehicle and
place onto accessory mount posts.
NOTE: While this can be done alone, we
do recommend assistance to prevent any
injury or damage to the vehicle.
Wiring for your light may vary
depending on if the wire is directed
towards the driver or passenger side
of the Bronco. For this install, the
wiring was on the passenger side.
The wiring was affixed along of the
bracket mount towards the back of
the Bronco. Feed wiring as preferred
or utilize factory provided wiring if
applicable.
STEP
6
Using the 10mm factory nuts, tighten
mount into place until secure. Do not
over tighten posts to prevent damage
to threads.