DV8 JK 4 Скачать руководство пользователя страница 5

Страница: 5 / 7

With the rack pressed up against the rear

hinge brackets, using the remaining M6

hardware and the eight large shoulder M6

washers, loosely secure brackets to rack.

Install all the clamps onto each foot, and

using a #4 allen and the M6x25 hardware.

Leave loose for adjustment.

Place the provided rubber trim on each foot

and set back into rain gutter. Using the

provided foam, place them on feet clamps

as shown.

STEP 10

STEP 9

STEP 8

INSTALLATION

MANUAL

NEED HELP?

855-680-9595

Содержание JK 4

Страница 4: ...ds the rear of the vehicle so the rack is resting against the rear hinge mount Assemble the rear rack brackets as shown in the image These will use the M6x20 hard ware and will require the 10mm wrench and 4 allen head Slide bracket between the factory hardtop and the rear window hinge and tighten until secure STEP 7 STEP 6 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Страница 5: ...sely secure brackets to rack Install all the clamps onto each foot and using a 4 allen and the M6x25 hardware Leave loose for adjustment Place the provided rubber trim on each foot and set back into rain gutter Using the provided foam place them on feet clamps as shown STEP 10 STEP 9 STEP 8 INSTALLATION MANUAL NEED HELP 855 680 9595 ...

Страница 7: ...ck Tighten all feet to the rack By doing this last it will allow feet and rack to move as needed while securing all feet Reinstall factory plastic hinge caps Double check fitment and that all hardware is secure STEP 14 INSTALLATION MANUAL NEED HELP 855 680 9595 ...