INSTALLATION
MANUAL
855-680-9595
NEED HELP?
STEP
1
REMOVAL OF FACTORY STEEL BUMPER
STEP
2
Begin by removing the front plastic
d-ring guards. Using a screwdriver or
push pin remover, remove the (2) pins
on the bottom and (2) near the top of
the d-ring mount.
Using a 15mm socket, loosen the (3)
bolts on each side.
Note: When you do this, the bumper can
become free from the vehicle and can fall.
Ensure you have another person holding
it, or the bumper secure to prevent falling
and injury.
Pull the top half away from the Bronco
and set to the side. Repeat for the
other side.
