26
RMO600 Error Messages
10 Error Messages
Any operational error is indicated by a red LED and accompanied by an alarm.
Furthermore, the display indicates an error status message.
To stop the alarm buzzer, remove the status message on the display, and return
to the
Sing
menu, press the
STOP
button.
10.1 Error Message "Voltage Sense"
Note:
Voltage sense cables disconnection, occured during the test, will cause
an erroreous result. The display will not show this asan error message.
10.2 Error Message "Open Connection"
Figure 10-1:
Disconnection
of a
"Voltage
Sense"
cable and error
message
If one of the "Voltage Sense"
cables to the test object is
disconnected, on either the
test set or the test object side
at the start of the test, the
error message "Voltage
sense" is displayed.
Figure 10-2:
Disconnection of
the current
cables and error
message
If one of RMO600 current
cables ("+" or " -") to the test
object is disconnected, on
either the test set or the test
object side
at the start or
during the test, the error
message "Open
Connection" is displayed.
