DV Mark DV Micro 50, Руководство пользователя

Страница: 4 / 8

4
1) INPUT
Connect your guitar to this input using a standard ¼” shielded instrument cable. It’s also designed to perfectly interface with all the effects
most used by guitarists.
2) LEVEL This knob sets the input level, turn it up gradually until you reach your desidered volume.
3) BASS This knob controls the amount of low frequencies in your sound.
4) MID The Middle control regulates the
midrange frequencies and it is an important
part of your tone shaping.
5) HIGH
The High knob controls the amount
of high frequencies in your sound.
6) DRIVE (LEAD CHANNEL) Adjusts the
amount of distortion on CH2, ranging from
crunch to overdrive sounds.
7) BASS This knob controls the amount of
low frequencies in your sound.
8) HIGH The High knob controls the amount
of high frequencies in your sound.
9) LEVEL (LEAD CHANNEL) This knob sets
the input level, turn it up gradually until you
reach your desidered volume.
10) REVERB Level control for the onboard reverb. This amp features a last generation of digital reverb, it’s sweet-sounding, warm and natural.
11) AUX
Use this input to plug in an iPod, CD or MP3 player using a mini plug 1/8”. This signal mixes in evenly with your instrument input.
12) CLEAN/LEAD SWITCH This channel selector switches between the Clean and Lead channels.
Channel-switching can also be controlled by a footswitch that can be plugged into the amp’s rear panel (20).
13) PHONES For quiet practing plug headphones into this mini plug 1/8” input. You can practice anywhere and anytime you like, always with a
professional sound.
14) ON/OFF SWITCH This switch delivers AC power to the amp.
FRONT PANEL
SPEAKER OUT
MIN LOAD 4Ω
LINE OUT
FSW
VOLTAGE
120
240
1
7
2
6
5 13
4
3
8 9
10
11
12
14
15
16 17 18 19
20