Control Panel expert settings
DV4mini list and auto connect:
The list shows all DV4minis found in your local network and their status. If
you run a DV4mini without the user interface then you have to start the
program “dv_serial” on this computer.
Usually “auto connect” should be checked. The software will automatically
connect to the next available DV4mini.
You can run more than one DV4mini in your local network (with dv_serial
started). Select one of them by checking one in the list.
Accept only own call sign:
If this entry is active, then only one D-Star transceivers with the same call
sign as the DV4mini call sign can operate via the hotspot. All others are
locked out. This is a requirement in some countries. This applies only to
D-Star mode.
21
