4
DISEL
FIRE PANEL
INSTALLATION, MAINTENANCE and OPERATION GUIDE
4. GENERAL INFORMATION OF THE PRODUCT
4.1 General Specifications of the Product
●
The control board you have purchased is designed based on microcontroller.
●
All of the control operations on the panel are done electronically and stored in memory.
●
The electronic board in the control panel is produced with high-tech SMD material.
●
SMD led lamp and LCD screen with minimum energy consumption are used as indicators.
5. FRONT PANEL DESCRIPTION AND USE
4.2 Technical Specifications of the Product
●
Microprocessor based design.
●
64 Mhz operating frequency.
●
128 Kb Program memory.
●
3936 byte SRAM 1024 byte EEPROM.
●
1.000.000 read/write data capacity.
●
100 years data retention life.
●
Design with nanowatt technology.
●
128x64 pixel graphic screen.
●
Password protection.
●
Maintenance settings menu.
●
Programmable digital input.
●
Programmable battery selection.
●
Programmable starter cut setting.
●
Measuring the temperature value.
●
Measuring the oil pressure value.
●
Measuring the fuel value.
●
Ability to limit the number of starter.
●
Measuring battery voltage values and displaying on
the screen.
●
Low battery (charge fault) reporting.
●
Diesel revolution (RPM) measurement.
●
Reel time clock.
●
Select of closed-open type pressure switch.
●
Starting the pump with remote start.
●
Possibility to set error delay time.
●
Auto Manual selection switch.
●
Past 50 fault records.
●
Reel time clock automatic test.
●
Automatic test solenoid valve output.
●
Exchanger (cooling) outlet.
●
Adjustable stop delay time.
●
Memorizing the commissioning date.
●
Turkish English language support.
●
Ability to display running time on the screen.
●
Ability to display number of switchgear.
●
Ability to monitor working hours on the screen
●
Ability to use with pressure transmitter
●
Ability to se the pressure value.
●
Adjustment of set pressure value.
1.
128X64 graphic screen.
2.
Up arrow key to move up in the menu ont main
screen and provides paging
3.
Down arrow key to move down in the menu
provides.
4.
Set key to enter the menu and used the changes
made in the menu.
5.
ESC key to to return to the menu and the menu
before a transacton is allowed rise.
6.
Status Leds.
7.
Manuel start button.
8.
Manual stop button.
1
3
2
4
5
6
7
8
