DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
dux.com
dux.com
DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
5
4
DUX PASCAL-SYSTEM
CONFIGURE PASCAL-SYSTEM
ASSEMBLING
The Pascal System consists of three or six
interchangeable spring cassettes of
varying densities and tension.
Designed to provide three support zones –
shoulders, hips, legs – each cassette
is selected to match your body size
and weight for individually
customized comfort.
Common configuration is as follows:
SOFT
– at the head, allowing your
shoulders to sink into the bed.
MEDIUM
– in the middle, allowing hips
to sink down in the bed.
FIRM
– at the foot, allowing some
elevation for your legs and feet.
X. OPEN THE BED
Open the bed and fold the top over.
XI. ARRANGE THE CASSETTES
Arrange the cassettes according to your
preference.
FIRM
MEDIUM
SOFT
XII. FOLD THE TOP BACK OVER
Fold the top back over and zip the
bed closed.
CONSUMER CAUTION
Do not sit on the head- or foot-end while
adjusting the bed.
THE HAND CONTROL
The motor comes with two 9V batteries. The batteries are used to lower the ends to their
original flat position in the case of a power failure. (Test batteries often)
NOTE
: The bed cannot be raised with only battery power.
head end up
head end down
both head and
foot end up
both head and
foot end down
foot end up
foot end down