
Installer’s Guide
17
Pre Boosted Gas Solar Water Heater MP15
H4099 4099 Rev. D
Step 20
• Align the pin positions carefully and
press home the collector temperature
sensor (Part No. H0403) into the 20
metre collector temperature sensor
cable (Part No. H0402).
• Secure the connection by tightening
the thumb screws.
Warning: If the collector
temperature sensor cable is
exposed to atmosphere, you
must insulate the cable from
UV radiation damage.
Warning: Sensor connector
pins align one way only. When
attaching sensors, carefully
align the connector pins with
the correct holes, taking care
not to bend or damage them.
Collector temperature
sensor (Part No. H0403)
Part No. H0402)
Caution: Sensor connector pins align one way only
1
2
3
3
2
1
20m collector temperature sensor cable (Part No. H0402)
(Male /male connectors).
If the collector temperature sensor cable is exposed to
atmosphere, you must insulate the cable from UV
radiation damage.
Thumb screw
Part No. H0403)
Installer’s Guide