dux.com
DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
1
HARDWARE
TOOLS NEEDED
Torx T30
(included)
×4 Wheels
Bluethooth
Hand control
Retainer
bar cover
Retainer bar
ASSEMBLING
II. RAISE THE HEAD AND FOOT END
Plug the outlet. Connect the remote
control to motor.
(Follow the remote instructions.)
Raise the head and the footend to the
maximum height.
I. ATTACH THE WHEELS
Flip the bed over and attach the wheels.
III. MOUNT THE RETAINER BAR
While the head and foot ends are
raised, mount the retainer bar.
Remove the screws at the foot end
and use them to fasten
the retainer bar to the bed.
