DUVLAN Viking DVL2002, Руководство пользователя

Страница: 18 / 23

(63) a matice (50).
–
namontujte kladku č.9 (33) na 2 držáky kladky (36) pomocí šroubu (81), 2 podložek (63) a
matice (50).
–
namontujte kladku č.10 (33) na spodní madlo (03) pomocí šroubu (81), 2 podložek (63) a
matice (50).
–
připojit spodní madlo (31) nebo kotníkový pás (71) na konec lanka 4120 mm (25) pomocí 2
karabin (35) a 1 řetězu (27).
GB:
1, Start with the upper cable 2990 mm (24)
–
with the upper cable 2990 mm (24) in groove of pulley (33), thread the upper cable (24)
through brackets on the upper cross beam (11).
–
instal the pulley No.1 (33) to the upper cross beam (11) using the hex bolt (81), 2 washers
(63) and nylon nut (50).
–
instal the pulley No.2 (33) to the main frame (04) using the hex bolt (81), 2 washers and
nylon nut (50).
–
instal the pulley No.4 (33) to the upper cross beam (11) using the hex bolt (81), 2 washers
(63) a nylon nut (50). Attach the bolt end of cable (24) to selector shaft (05) with black
washer (78). Attach the other end of cable (24) to high pull (30) using one snap hook (35).
–
instal pulley No.3 (33) to 2 pulley patch (36) using hex bolt (81), washers (63) a nylon nut
(50). Use adjusting holes in pulley patches (36) to adjust cable tension.
2, Assembly the cable 2160mm (26)
–
attach both end of cable 2160mm (26) to left and right butterfly arm (16 and 17) using 2 hex
bolts (59), 2 nuts (75), 4 washers (63) and 2 nylon nuts (50).
–
with cable 2160mm (26) in groove of pulley (33) thread cable (26) through brackets on main
frame (04).
–
instal pulley No.11 and No.13 (33) to single pulley blocks (12) using 2 hex bolts (81), 4
washers (63) and 2 nylon nuts (50).
–
instal pulley No.12 (33) to pulley U (34) using hex bolt (81), 2 washers (63) and 2 nylon nut
(50).
3, Assembly the cable 4120mm (25)
–
with the cable 4120mm (25) in groove of pulley (33) through leg extension frame (14) and
front base frame (01).
–
instal pulley No.5 (33) to leg extension frame (14) using hex bolt (81), 2 washers (63), 2
plastic bushing (72) and nylon nut (50).
–
instal pulley No.6 (33) to front base frame (01) using hex bolt (81), 2 washers (63) and
nylon nut (50).
–
instal pulley No.7 (33) to pulley U (34) using hex bolt (81), 2 washers (63) and nylon nut
(50).
–
instal pulley No.8 (33) to front base frame (01) using hex bolt (81), 2 washers (63) and
nylon nut (50).
–
instal pulley No.9 (33) to 2 pulley patch (36) using hex bolt (81), 2 washers (63) and nylon
nut (50).
–
instal pulley No.10 (33) to low pull seat (03) using hex bolt (81), 2 washers (63) and nylon
nut (50).
–
attach the low pull (31) or ankle strap (71) to the end of cable 4120mm (25) using 2 snap
hook (35) and 1 chain (27).
18