EN
Step 5
At least 2 adults are required for final assembly.
Catch one Table Half (H4) and insert it into the Undercarriage (P2) as indicated in Fig.5.1.
The table legs must face the wheels of its side in order to reach the right opening position.
Be careful when placing the safety device in the rail, pull it from inside with the Safety Catch
Ring and slide it down into the rail.
The safety catch must be located on the bottom hole (closed position), if it actuates on top
hole, release it and slide it down.
Release it and slide down the top to the bottom hole (closed position) as shown in Fig. 5.2.
With the Bolt (H3), Nut (H7), Washer (H9) and Big Bushing (H10), attach the Short Linkage
Tube(P5) and the Long Linkage Tube (P10) as shown in Fig. 5.3.
Repeat the same assembly for the other Table half (H4).
Make sure the Frame Guide Plastic Caps (P13) are attached to the top of Undercarriage (P2).
24
