Dutch originals DO-CH-ACL150DRT, Руководство пользователя, Страница: 8 / 48

A
B
E
C
F
D
G
Modes
Power ON/OFF
Connect the device to an easily accessible power socket. When connected, the power LED
indicator on the control panel lights up and a beep sounds.
Press the power
ON/OFF
button on the device
1
or remote control
A
to switch on the
device. While pressing, a beep sounds.
When the device is powered on, it starts at medium FAN speed, after 3 seconds it changes
to low speed.
When switching on the device it automatically starts in
Normal
mode.
To switch off the device, press the power
ON/OFF
button on the device
1
or remote
control
A
again. A beep sounds. The power LED stays illuminated on the control panel.
FAN mode
You can ventilate your room. In this mode the air is circulated, creating a ‘breeze feeling’,
but the room will not be cooled.
Press the
FAN
button on the device
6
or remote control
F
until the LED indicator lights up
on the control panel.
You can select the required FAN speed as described in “FAN speed”
EN 06
A
B
E
C
F
G
D
REMOTE CONTROL:
Power ON/OFF
FAN speed
Cool mode
Swing mode
Timer
FAN selection
BREEZE mode
Remote control
The remote control has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.
Inserting / replacing the remote control battery:
1) Push the security lock.
2) Pull out the battery tray and remove the old battery.
3) Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated.
4) Place battery tray back in the slot.
CONTROL PANEL:
Power ON/OFF button
Timer button
Swing mode button
FAN Speed button (low-medium-high)
Cool button
FAN button (normal-natural-sleep)
Breeze
1 4
2 5
3 6
7