Part No 94160-G
2018-06-26
S 11000, S 21000, S 32000, S 34000, S 46000
S 11000 EX, S 21000 EX, S 34000 EX - 22
Safety Considerations
Warning!
When using electric machines, basic safety
precautions should always be followed to reduce the risk
of
fi
re, electric shock and personal injury, including the
following:
1.
Important!
The sticker ”Do not pick up sources of ignition”
(symbol as in Figure CC. 1 of EN 60335-2-69) is
af
fi
xed to the machine. No hot, glowing particles or
other sources of ignition may be vacuumed up. The
machine must not be used for explosive, unstable or
self-igniting particles or dust with a minimum ignition
energy of (MIE) <3 mJ.
Type 22 machines are not suitable for vacuuming up
dust and liquids with a high risk of explosion or mix-
tures of combustible dust and liquids. Furthermore,
they are also not suitable for vacuuming up potentially
explosive or similar substances according to Directi-
ves 2014/34/EU and 1999/92/EC.
– WARNING!
The machine may only
be used by persons with appropriate training in its
handling.
– WARNING!
The machine may only be
used for the vacuuming up and removal of dry dust.
– CAUTION!
The machine may only be
used indoors.
– CAUTION!
The machine must be
stored indoors.
– BEWARE!
For dust with an ignition
energy below 1 mJ. Additional restrictions may
apply in accordance with local health and safety
regulations.
– CAUTION!
The machine is not suitable
for connection to machines that generate dust.
2. Work area environment
Keep the area around the central unit clean. Do not
store or work with
fl
ammable liquids or gases near
the machine.
3. Overload
If there is an alarm signal it should be carefully
checked out to see that the machine is un damaged.
If there are any damaged parts these should be re-
paired by a Dustcontrol authorised service centre.
Always follow the regulations pertinent to the mate-
rial you are working with. Do not use the machine
for purposes that it is not intended for.
4. Bodily
injuries
Never let the suction come in contact with parts of
the body, for example a hand. The vacuum pro-
ducer generates a high negative pressure, severe
injury may result.
5. Electricity
A separate lockable disconnect must be installed
where it is readily accessible to the vacuum produ-
cer. Do not repair the electric components yourself,
get somebody quali
fi
ed. Faults may cause injury.
See also under section 9, ’Warnings’.
6. Important
measure
Before working on the dust separator - always turn
off and lock the disconnect of the vacuum producer.
7. Maintain the machine with care
Always
clean
fi
lter before taking of the discharge
arrangement. Always follow the regulations per-
tinent to the material that you are working with.
Follow instructions.
8. Checking for damage
Check the machine regularly for damage. If there
are any damaged parts these should be repaired by
a Dustcontrol authorised service centre.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
quali
fi
ed persons in order to avoid a hazard.
9. Warning
Use only accessories and replaceable parts which
are available in the Dustcontrol catalogue. When
using non-genuine parts, especially
fi
l-ters and
plastic sacks, dust leaks could occur which may be
hazardous to health.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
This machine is intended for commercial use
only, for example in hotels, schools, hospitals,
factories,shops, of
fi
ces and rental businesses.
Содержание S 11000
