F 11000 - 11
Part No 94158-A
Safety Considerations
Read all instructions before the machine/installation
is commissioning.
The equipment must be installed and maintained pro-
perly by quali
fi
ed personnel who have study this user
instruction. Dustcontrol does not take responsibility
for defective installation or maintenance.
Warning!
When using electric machines, basic
safety precautions should always be followed to
reduce the risk of
fi
re, electric shock and personal
injury, including the following:
1. Work area environment
Keep the area around the preseparator clean.
Do not store or work with
fl
ammable liquids or
gases near the machine.
2. Overload
Always follow the regulations pertinent to the
material you are working with. Do not use the
machine for purposes that it is not intended
for.
3. Bodily
injuries
Never let the suction come in contact with
parts of the body, for example a hand. The
preseparator generates a high negative pres-
sure, severe injury may result.
4. Important
measure
Before working on the preseparator - always
turn off and lock the disconnect of the vacuum
producer.
5. Maintain the machine with care
Always follow the regulations pertinent to the
material that you are working with. Follow
instructions.
6. Checking for damage
Check the machine regularly for damage. If
there are any damaged parts these should be
repaired by a Dustcontrol authorised service
centre.
7. Warning
Use only accessories and replaceable parts
which are available in Dustcontrol catalogue.
When using non-genuine parts, especially
fi
lters and plastic sacks, dust leaks could occur
which may be hazardous to health.
Description
The F 11000
fi
lter unit is of modular construction.
The inlet module can for example be both rotated
and reversed. Additional module rings can be
installed to increase the storage capacity of the
cyclone. Collected dust is contained in a plastic
sack or container.
EN
G
LI
S
H
