DuroStar DUAL FUEL HYBRID ELITE DS5500EH Скачать руководство пользователя

Страница: 7 / 70

SAFETY ALERT SYMBOL

DANGER:

This generator produces poisonous carbon monoxide gas when running. This

gas is both odorless and colorless. Even if you do not see or smell gas, carbon monoxide
may still be present. Breathing this poison can lead to headaches, dizziness, drowsiness,
and eventually death.

●

Use outdoors ONLY in non-confined areas.

●

Keep several feet of clearance on all sides to allow proper ventilation of the generator.

WARNING:

The exhaust from this product contains chemicals known to the State of

California to cause cancer, birth defects, or other reproductive harm.

WARNING:

This generator produces heat when running. Temperatures near exhaust can

exceed 150°F (65°C).

●

Do not touch hot surfaces. Pay attention to warning labels on the generator denoting
hot parts of the machine.

●

Allow generator to cool several minutes after use before touching engine or areas
which heat during use.

The safety alert symbol is used with one of the safety words (

DANGER

CAUTION

, or

WARNING

) to alert you of hazards. Please pay attention to

these hazard notices both in this manual and on the generator.

GENERAL SAFETY PROCEDURES

Please familiarize yourself with the following safety symbols and words:

●

DANGER

: Indicates a hazard that will result in serious injury or death if instructions are not

followed.

●

WARNING

: Indicates a strong possibility of causing serious injury or death if instructions are not

followed.

●

CAUTION

: Indicates a possibility of personal injury or equipment damage if instructions are not

followed.

Содержание DUAL FUEL HYBRID ELITE DS5500EH







































































Результаты поиска

Содержание DUAL FUEL HYBRID ELITE DS5500EH

Отзывы:

Похожие инструкции для DUAL FUEL HYBRID ELITE DS5500EH

Бренды по названию

Популярные бренды

DuroStar DUAL FUEL HYBRID ELITE DS5500EH, Руководство пользователя

Результаты поиска

Содержание DUAL FUEL HYBRID ELITE DS5500EH

Отзывы:

Похожие инструкции для DUAL FUEL HYBRID ELITE DS5500EH

Бренды по названию

Популярные бренды