E-10
E-9
HOW TO PLAY MP3 DISCS
- INSERT A MP3 DISC INTO THE PLAYER AND CLOSE THE CD DOOR.
- PRESS “ON/ STANDBY” KEY TO SWITCH ON THE UN IT.
- PRESS THE “FUNCTION” LEY REPEATEDLY UNTIL THE DISPLAY SHOW “CD”.
- THE DISK WILL SPIN AND PERFORM A FULL CHECK OF THE DI SC TO COUNT THE TOTAL
NUMBER OF SONGS. THEN PLAYBACK OF THE FIRST SONG (TRACK) WILL BEGIN AND
THE DISPLAY WILL INDICATE THE CURRENT TRACK NO: (001).
- IF YOUR DISC HAS “FOLDER” (SEE BELOW) THE DISPLAY WILL SHOW THE F OLDER
NUMBER (eg. F01, etc..) EVERY 5 SECONDS.
- AT ANY TIME DURING PLAYBACK, PRESS AND RELEASE OR TO SKIP
BACKWARDS OR FORWARDS BY ONE TRACK.
- MP3 DISCS OFTEN CONTAIN GROUPS OF SONGS OR SEVERAL "FOLDER"
(SUB DIRECTORIES), YO U CAN USE THE + 10/ FOLDER KEY TO QUICKLY JUMP TO
A PARTICULAR SONG.
PRESS AND RELEASE TH E +10/ FOLDER KEY = SKIP +10
PRESS AND HOLD THE +1 0/ FOLDER KEY = REPEATEDLY TO CHOOSE THE FOLDER
- EACH TIME YOU PRESS THE +1 0/ FOLDER , THE PLAYER JUMPS
TO THE FIRST SONG IN THE NEX T FOLDER. (THE DISPLAY WILL ALTERNATE BETWEEN
THE SONG NUMBER & THE FOLDER NUMBER EVERY 5 SECONDS).
(NOTE: THE “FOLDER” FUNCTION ONLY WORKS O N MP3-DISCS WHICH HAVE FOLDERS.
USB-
MP3 PLAYBACK
DRIVE
PERCENTAGE (ABOUT 5%) OF USB FLASH DRIVES MIGHT NOT BE READABLE, DUE TO THOSE
USB-DRIVE MANUFACTURERS NON-COMPLIANCE WITH THE FULL (OFFICIAL) USB 1.1 / 2.0 STANDARDS.
ALTHOUGH THIS PRODUCT IS FULLY COMPATIBLE WITH USB 1.1 & 2.0 STANDARDS, A SMALL
NOTE:
THE READING TIME FOR A USB-DRIVE VARIES DEPENDING ON THE SPEED OF THE MEMORY DEVICE
AND THE NUMBER OF SONGS AND FOLDERS. IN SOME CASES THE READING TIME MAY BE AS LONG
AS 60 SECONDS.
ALWAYS SWITCH OFF THE UNIT OR CHANGE MODE TO “CD” OR “RADIO”BEFORE REMOVING A USB
FLASH DRIVE, TO PREVENT DAMAGE TO YOUR USB DEVICE.
IMPORTANT
- THIS UNIT IS EQUIPPED WITH A USB SOCKET WHICH CAN ACCEPT AND PLAY MP3
FILES STORED ON STANDARD USB FLASH DRIVES (ALSO KNOWN AS "PEN DRIVES")
WHICH ARE FOR MEMORY STORAGE. (COMPATIBLE WITH USB VERSION 1.1 & 2.0).
- TO UTILIZE THIS FACILITY, FIRST INSERT EITHER A USB-DRIVE INTO THE SLOT (PORT).
- PRESS THE FUNCTION KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "USB".
- AFTER ABOUT 5-10 SECONDS THE DISPLAY WILL INDICATE THE NUMBER OF MP3
SONGS FOUND ON THE USB-DRIVE , AND ALSO THE NUMBER OF FOLDERS ON
THE DEVICE.
- PRESS THE +10/ FOLDER KEY REPEATEDLY TO SELECT THE DESIRED FOLDER NUMBER.
- PRESS NEXT OR BACK TO SKIP FORWARD OR BACKWARDS TO SELECT THE
DESIRED MP3 FILE IN THE SELECTED FOLDER.
- PRESS PLAY/PAUSE TO START PLAY BACK OF THE SELECTED SONG.
- ALL FUNCTIONS FOR USB-DRIVE ARE EXACTLY THE SAME AS IN CD-MP3 MODE
(AS PREVIOUSLY DESCRIBED).
SPECIFICATIONS
POWER SUPPLY : ................................... AC 100V-240V ~ , 50/60Hz
POWER CONSUMPTION : ....................... 15 W
SPEAKER : .............................................. 2.5” x 2
FREQUENCY : ........................................ FM 87.5 - 108 MHz
REPEAT PLAYBACK FUNCTION
- AT ANYTIME DURING PLAYBACK, PRESS KEY REPEATEDLY
TO SELECT:
= TO REPEAT THE CURRENT TRACK
= TO REPEAT ALL TRACKS (FULL CD)
= TO REPEAT ALL SONGS FROM CURRENTLY SELECTED
FOLDER(DIRECTORY)
= TO PLAY SONGS IN A RANDOM ORDER (SHUFFLE)
P-MODE
ALL
FOLDER
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE THE STANDARD
STEREO HEADPHONE (3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE
"HEADPHONE-OUT OR AUDIO LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET
OF THIS UNIT.
- PRESS THE FUNCTION KEY TO SELECT "AUX" MODE.
- MAKE SURE THAT THE SPEAKERS ARE CONNECTED TO THE MAIN UNIT.
- SWITCH ON THE POWER OF THE MAIN UNIT AND THE EXTERNAL DEVICE
(eg. MP3-PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE MAIN UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE POWER OF THE MUSIC SYSTEM (MAIN UNIT)
WHEN YOU ARE FINISHED USING THE EXTERNAL DEVICE.
