Duronic PS410, Руководство пользователя

Страница: 5 / 33

5
Operation
Shredding Capacity
With the item plugged in, place the power switch in the ON position,.
Ensure the shredder wastebasket is in place, the LED will light up.
This means that the shredder in now ready for operation.
When the paper is inserted into the feed opening, the shredding process will
start automatically, and stop when the paper has completed its travel through
the feed opening.
The
PS410 mode selection switch is located on the top of the shredder.
Also located on top of the shredder is the ready LED. Their purposes are:
1. When the power switch is in the ON position,
the shredding process will start when the paper
is inserted into the feed opening, and will continue
until it has completely passed through the feed opening.
2. The reverse button is used to assist in the removal of a paper jam,
which reverses the shredding process prior to a completed forward cycle,
therefore, clearing the cutters. When switching from forward to reverse,
always stop momentarily to prevent prevent possible damage to the motor.
3. It is recommended to turn the shredder off,
when it is not being used for a prolonged period of time.
4. When the ready LED is lit up, it lets the user know that the wastebasket
is inserted correctly, and that the shredder is turned on and ready for use.
If the ready LED does not light up, make sure that the plug is plugged in,
and the basket is inserted correctly.
The PS410 will shred up to 8 sheets of paper and will
accept paper widths up to 220mm.
When shredding small material like envelopes or credit card receipts,
Insert them into the middle of the feed opening.