Duronic HR3L, Быстрый старт, Страница: 8 / 14

8
Use
Cleaning and Maintenance & Storage
• Unplug the appliance during filling and cleaning
• Place the appliance on a flat, stable surface
• Remove the mist outlet (1)
• Turn the water tank (3) upside down and turn the water inlet plug (8)
anti-clockwise
• Fill the water tank with water
Note: Water must be clean and the temperature must not higher than 40 ºC
Replace the water inlet plug into the water tank, turning clockwise, until fully locked
• Connect the power supply cord to the power outlet and switch on the
appliance by turning the control dial (6) clockwise
• The indictor light (7) lights up green
• Adjust the control dial (6) to control the mist level
• If the water tank is running out of water, the Indicator Light lights up in red
and the appliance stops working
Warning! Do not move the appliance before it is switched off and unplugged. The
appliance should be moved as a whole
Warning! Before cleaning and maintenance, switch the appliance off and remove the
plug from the socket.
Warning! Do not immerse the appliance or the cord set or the plug in water or any
other liquid.
The appliance is easier to clean if you do so immediately after use.
Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the
appliance.