Duronic EK30, Руководство пользователя

Страница: 11 / 54

11
The EK30 kettle gives you the option to heat your water to four different
temperatures: 40°, 60°, 80° and 100°.
To heat the water to boiling point (100°), simply press the power button and it will
automatically heat the water up to this temperature.
To select one of the cooler temperatures (40°, 60° or 80°), simply press the
power button to switch on the kettle, press the set temp button and then press the
temperature button you require.
The keep warm button can be used to keep the hot water at the selected
temperature of 40°, 60° or 80° for 30 minutes.
To use this function, press the power button to switch on the kettle, press the keep
warm button and then press the temperature button you require.
• Unplug the kettle and allow it to cool down completely before cleaning it.
• Do not get the base or electric parts wet or submerge them in water or any
other liquid.
• Do not use abrasive materials or chemicals to clean the kettle.
• Clean the outside of the kettle body by wiping it with a wet well-wrung sponge
or cloth.
• To clean and descale inside the kettle, fill the kettle with 600ml water and
600ml vinegar (a ratio of 1:1 of water and vinegar). Plug in and switch on the
kettle and bring it to the boil. Once boiled, allow to cool for few minutes and
then empty into the kitchen sink.
• Allow the kettle to cool down, then refill with fresh water and bring it to the boil
again. Once boiled, empty the water into the sink. Repeat this step two more
times.
Using the Temperature Control Buttons
Using the Keep Warm Function
Cleaning and Maintenance