Duron K7V266A Скачать руководство пользователя страница 62

Страница: 62 / 81

ACPI Function

Values

Meaning

Enabled

ACPI
Function

Disabled

Power Management Option

Values

Meaning

User Define The three items below can be set by the user.

Min Saving

The three items below are set to disabled, 1 hour, 1hour
respectively.

Power
Management
Option

Max Saving

The three items below are set to disabled, 1 min, 1min
respectively.

Disabled

Will not power down the HDD.

HDD Power
Down

1 – 15Min

Will power down the HDD if it is idle for the amount of
minutes selected here.

Disabled

The system will never enter suspend mode.

Suspend
Mode

1Min –
1Hour

Selecting a time will force the system into suspend mode after
being idle for that time. Choose from the following time
intervals: 1, 2, 4, 6, 8, 10, 20, 30, 40, min and 1 Hour.

Video Options

Values

Meaning

Always On

The monitor will always be on, no matter what the state of the
system.

Video Off
Option

Suspend

－

> Off

The monitor will be turned of in suspend mode. The item below
will specify what off method to use.

Blank
Screen

The screen will be blank (black) only.

V/H sync +
blank

The vertical and horizontal sync pulses will be stopped, and the
screen will be blank.

Video Off
Method

DPMS
support

If your monitor supports DPMS, it can be switched off through
that.

Modem IRQ

Values

Meaning

This disables the modem IRQ

Modem Use
IRQ

3 - 11

Select an IRQ line that will be assigned to your modem here.
Choose from: 3 (default), 4, 5, 7, 9, 10, 11.

Содержание K7V266A


















































































Результаты поиска

Содержание K7V266A

Отзывы:

Duron K7V266A, Руководство пользователя, Страница: 62 / 81

Результаты поиска

Содержание K7V266A

Отзывы: