DUROMAX XP5500EH Скачать руководство пользователя страница 20

Страница: 20 / 82

GENERATOR COMPONENTS

Recoil Start

– Easy Pull Recoil Start to start the engine without the electric start.

Air Cleaner

- A removable, cleanable, oiled, element that cleans the air going into the engine.

Choke Lever

- Restricts the airflow into the carburetor to assist in starting the engine.

Fuel Valve

- On/Off valve that allows gasoline to the fuel switch.

Fuel Tank

- All metal 4 Gallon gasoline fuel tank.

Power Panel

- Contains the start switch, plugs, meters, and circuit breakers.

Handles

- Allow easy movement across any surface.

Battery

- 12V DC Battery that powers the Electric Start System.

Oil Fill and Dipstick

- Use to add or check the oil.

10.

Propane Inlet

- Provides a regulated LPG Fuel supply to the engine. (Intended for use with an

LPG Source of 11 in. H2O or more.)

11.

Low Oil Alert

– Will light only if the generator shuts down due to low oil.

12.

Voltmeter

– Displays current voltage available.

5. Fuel Tank

2. Air Cleaner

7. Handles

8. Battery

9. Oil Fill and Dipstick

1. Recoil Start

6. Power Panel

4. Fuel Valve

3. Choke Lever

Содержание XP5500EH



















































































Результаты поиска

Содержание XP5500EH

Отзывы:

DUROMAX XP5500EH, Руководство пользователя, Страница: 20 / 82

Результаты поиска

Содержание XP5500EH

Отзывы: