DUROMAX XP12000HX Скачать руководство пользователя | Manualshive

Страница: 76 / 82

background image

WARRANTY

3-year Warranty

All DuroMax Power Equipment warrant the original purchasers to a 3-year Parts Warranty
(Residential Use ONLY: Unusually heavy or commercial use is covered for a period of 1-year) in
the event of failure due to defects in electrical or mechanical components. Freight on any items
submitted for replacement or repair under the Warranty is the responsibility of the equipment
owner. This warranty is non-transferable and only valid to the original purchaser.

Warranty Exclusions

The DuroMax Power Equipment warranty does not cover repairs or returns when the fault is:
Normal Wear and Tear, Installation Use or Maintenance Services, Cosmetic defects, Accessories,
Failures due to acts of God or Natural Disasters, or problems related to/from aftermarket or non-
OEM parts.

Warranty Limitations

DuroMax Power Equipment does not claim or hold any obligation to loss of time, freight charges,
use of the product, or any incidental damages from the use of this product. THIS WARRANTY IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED.

U.S EPA AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board, The United States Environmental Protection Agency (US EPA)
and DuroMax Power Equipment, are pleased to explain the emission control system warranty on

your 2020-2021 year small off-road engine. In the United States and California, new small off-road

engines must be designed built and equipped to meet the State’s stringent anti-smog standards.

DuroMax Power Equipment must warrant the emission control system on your small off-road

engine for the periods of time listed below provided there has been no abuse neglect or improper

maintenance of your small off-road engine.

Your emission control system may include parts such as the carburetor or fuel injection system, the
ignition system, and a catalytic converter. Also included may be hoses, belts, connectors, and other
emission-related assemblies.

Where a warrantable condition exists, DuroMax Power Equipment will repair your small off-road

engine at no cost to you including diagnosis, parts, and labor.

MANUFACTURER’S WARRANTY COVERAGE:

As the small off-road engine owner, you are responsible for the performance of the required

76

«
...
74
75
76
77
78
...
»

Содержание XP12000HX



















































































Отзывы:

Нет отзывов

Похожие инструкции для XP12000HX

Бренд: Audiovox Страницы: 37

Бренд: Titan Страницы: 11

Бренд: Goodmans Страницы: 2

TransSteel 2200

Бренд: Fronius Страницы: 136

Бренд: SMC Networks Страницы: 40

Бренд: Altrad Страницы: 56

Бренд: Parker Страницы: 15

GP Series 005938-0

Бренд: Generac Power Systems Страницы: 56

OTC AC/MIG/201 CPDACA-200

Бренд: Daihen Страницы: 48

Бренд: HP Страницы: 53

Бренд: HP Страницы: 147

Intelligent Power Distribution Unit

Бренд: HP Страницы: 104

Бренд: HP Страницы: 114

Бренд: HP Страницы: 348

Бренд: HP Страницы: 445

Бренд: HP Страницы: 496

Бренд: HP Страницы: 1

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды